SW8 MK2 AUTO SWITCHER 08 CHANNEL LINE LEVEL

SW8 MK2 is mainly used to perform staged using the backing track, 8 channel switcher for live concert. If trouble occurs in the main playback machine, the machine, automatically to the backup machine, or manually, or you switch on the remote control. This machine, of the two groups of eight audio input, can be routed to eight outputs one of the group. Input, standard 8-channel 25-pin D-Sub terminal or, done in the 1/4 "TRS jacks. The output is an 8-channel 25-pin D-Sub (balance, line level), or transformer output mic level XLR of done in the output. Many of the engineers, the D-Sub output is sent to the playback system for monitoring, use the XLR output of Futoronto panels and microphone splitter, the connection of the Snake system for PA . New feature: MUTE: Stop the balanced XLR output ALT 1 or 8: drone track the channel 1 or 8 for auto switching, select whether to receive either STANDBY: to hold the automatic switch to the input A, the unit while waiting for the drone signal, does not make the switch to the input B Can be used a radial made JR2 FOOTSWITCH for remote Spec: Input : A & B 1/4 "phone : TRS balanced + 4 dB / -10 dB D-Sub : DB25 balanced + 4 dB / -10 dB Input impedance : 140K O typical (without Global PAD), 10k O typical (with Global PAD) Direct output Type : Passive balance Switching Time : 3ms maximum (20 ° C at the time) XLR output Frequency characteristics : 20Hz~20kHz +/- 2.5dB THD : 0.01% from 20 Hz to 20 kHz Output impedance : 600 ohms Output : -50dB (microphone level) equilibrium (pin 2 hot) PAD : -20 dB (Global: common to all channels) Foot switch 1/4 "phone Relay contact output 1/4 "phone : 5-24 VDC relay circuit Dimensions : 483W × 165D × 44H mm Weight : 3.26 kg Power : Output 15 VDC @ 400 mA