GUITAR EFFECTS LOOP FOR BALANCED LINE LEVEL SIGN

The EXTC-SA Guitar Effects Reamp Interface from Radial Engineering is a standalone audio interface that lets you incorporate guitar effects into pro-audio recording. This unit is easy to use; just connect a line-level signal from the recording system. The unit unbalances the signal and converts it to high impedance where guitar pedals can be inserted at will. Simply plug in, turn the track on, set your levels, and adjust the blend for adding various effects to your track. It includes Radial's 100% discrete class-A guitar buffering for ultimate audio integrity, transformer isolation to eliminate buzz and hum caused by ground loops, 180º polarity reverse to keep effects and balanced signals in phase, and 2 loops that will let you compare signal paths or combine them to create your own sounds. Circuit Type Solid state with transformer-coupled effects loop Power Requirement 60 mA, ±16 VDC Output Gain 12 dB - send & receive at maximum 6 dB - send minimum/receive maximum 0 dB - send & receive set at 12 o'clock Frequency Response Dry: 20 Hz to 20 kHz, ±1.5 dB Wet: 20 Hz to 10 kHz, ±3.5 dB (-8 dB @ 20 kHz) THD + N Dry: >0.005% 0 dB output Wet: >0.002% 0 dB output Noise Dry: -93 dB Wet: -84 dB Intermodulation Distortion Dry: >0.003% 0 dBu input Wet: <0.02% 0 dBu input Maximum Input Dry: +26 dBu Wet: +20 dBu Effects Loop Send 1/4" Output: Connector: Unbalanced 1/4" Impedance: 1.5 k ohms Gain (Variable): From -14 dB to +3 dB 0 dB at center point Maximum Gain: ±3 dB Receive 1/4" Input: Connector: Unbalanced 1/4" Impedance: 10 k ohms Gain (Variable): From -99 dB to +9 dB 0 dB at center point Maximum Gain: +9 dB Line In/Out Input: Connector: Balanced XLR Female Rear Panel Impedance: 15 k ohms Output: Connector: Balanced XLR Male Rear Panel Impedance: 200 ohms Headroom: +25 dBu Dimensions (L x W x H) 5.84 x 4.81 x 1.98" (14.83 x 12.21 x 5.02 cm) Weight 2.3 lb (1.0 kg)