AER FRONT FOAM TO SUIT MODELS AER AS281 BPF Q8 ASQ8

Front foam with AER logo ZAER24 AER FRONT FOAM TO SUIT MODELS AER AS281 BPF Q8 ASQ8 DIMS: 526X445X10MM WE RECOMMEND TO CHANGE YOUR FOAM EVERY 6-10 YEARS The foam is cut to size for the corresponding amplifier model. Apply the foam as follows: Remove the old foam without residue. Behind the foam is a perforated plate bolted, that protects the speakers Mix commercially available wood glue ( Selleys Quik Grip or similar ) with water in the ratio 1: 3 - ONLY A SMALL AMOUNT IS NEEDED * DOB IT ON EITHER SIDE OF THE FRAME AND FOAM Stir well enough and keep the amplifier upright to avoid liquid glue dripping on the speaker. Now paint the grid with the glue and let the grid rest for about 5 minutes. Now you can put the amplifier on the back and the new one Press foam on the grid. (Make sure the amplifier is on a soft surface) After another 5 minutes, the foam is firmly attached to the grid.