AER BASIC PERFORMER 2 AMP - 4 X 60W AMPS 4 X 8"SPEAKERS

AER BASIC PERFORMER 2 AMP - 4 X 60W AMPS 4 X 8"SPEAKERS The range and power to amplify acoustic guitars and basses right. The Basic Performer Acoustic Guitar Amp with its specially designed construction and its 4 x 60 watt power is an ideal tool for acoustic and electric bass-amplification. More than that, it suits very well for all instruments with strength in the low register, e.g.: cello, harp etc. Apart from its two channels with three-band tone- control and mute-switch it offers a compressor and a notch filter. Long scale lengths, huge body sizes, and resonance problems are only some trouble zones of the acoustic instrument. The small twin-cone system is perfect - it is fast, provides a superior coverage for the critical mid-range and has got enough substance in the bass range. The AER Basic Performer has four 8"-twin-cone speakers which are individually powered by four 60W power amps provide for the required surface area and the necessary sound pressure level. The special AER band-pass / bass-reflex cabinet design supports the reproduction of even the lowest frequencies with definition. Hi-end preamps, proper filters and additional professional sound design make the Basic Performer amplifier a multitalented all-round solution. The sound characteristics of this AER amp are full range, open and light - breathing as well as grumbling and surprisingly appropriate for far more instruments than the bass-related instruments such as harp, cello, accordion ¦ or even try a jazz guitar. FEATURES Channels 1 + 2: Input: XLR-combination-socket with a socket for a 6.3 mm jack-plug and an XLR-mle-socket Channel Mute: switch to mute the channel Line/Mic: switch to adjust input sensitivity Line: sources with line level, instruments with active preamplifiers and magnetic sound pick-ups Mic: symmetrical microphone input with 24 V phantom power Clip: overload indicator Gain: input level control Bass: tone control for bass Middle: tone control for mid-range Treble: tone control for treble Input: socket for a 6.3 mm jack plug Channel Mute: switch to mute the channel Pad: damp-switch Clip: overload indicator Gain: input level control Color: mid-range contour filter, switchable Contour: control for mixing-in internally generated harmonics Bass: tone control for bass Middle: tone control for mid-range Frequency: mid-range frequency selection Treble: tone control for treble Front, bottom (from left to right): DI Pre/Post: DI-switch pre/post EQ 24V Phantom: 24 volt-phantom-power on/off 9V Phantom: 9 volt-phantom-power on/off Compressor: switches compressor on/off Threshold: control for the operational level Active: compressor operational Ratio: control for the compression-ratio ±1dB: indicates the reduction of amplification in dB ±3dB: indicates the reduction of amplification in dB ±6dB: indicates the reduction of amplification in dB ±12dB: indicates the reduction of amplification in dB Notch Filter: filter on/off Frequency: level-control for the frequency-selection Aux Return: level-control for aux return Effect Return: level-control for effect return Power: power indicator lamp Master: Solo - level-control for the overall volume, solo-setting, Ensemble - level-control for the overall volume, ensemble-setting Rear: Tape In: stereo input for CD and tape Phones: headphone output, stereo Tuner: output for a tuner Insert: insert-point, Tip = Send, Ring = Return, Line Out line-output DI Out: XLR-output pre-master Send: output for an external effect device Return: input for an external effect device or other signal, for example CD-player FS-Effect: footswitch effect on/off FS-Master: socket for a stereo footswitch, master-selection solo/ensemble FS-Mute: socket for a stereo footswitch to mute the channels Voltage Select: voltage selection switch Power: power supply with line-socket and fuse-holder